- Easy in use
- Fast drying
- Product Type
Coverage 3 to 4 m²
Drying Time The drying time depends on temperature, humidity and the thickness of the applied coat.
The surface should be clean, dry and free of grease.
The aerosol should be at room temperature. Best processing temperature 15 to 25°C.
Before use, shake the aerosol for 2 minutes and spray a sample.
Distance to the surface to be treated approximately 25 to 30 cm.
Apply a thin layer of sanding aid and allow to dry. Sand the surface till the control guide coat is completely removed.
After use, clean the valve (turn aerosol upside down and press the nozzle for approximately 5 seconds).
The drying time depends on the ambient temperature, the humidity of the air and the thickness of the coat applied.
- Stock Status: In Stock
- Product Code: GC500